The TesiraFORTÉ DAN product family uses the same TesiraFORTÉ base platform we know and love and adds Dante audio networking. This offers streamlined interoperability with Shure MXA and MXW products as well as Dante products from other manufacturers. Each TesiraFORTÉ DAN is capable of 32 channels in and 32 channels out via the Dante network port. If you are working with an AEC capable TesiraFORTÉ DAN, then you now have up to 12 channels of AEC processing available for Dante microphone sources. This means that a single TesiraFORTÉ DAN can provide AEC processing for up to (3) MXA310 (4 channels each) or a single MXA910 (8 channels each). We’ll borrow some imagery from our System Design Guides to help illustrate these examples:
When designing a system file in Tesira software, there are now custom MXA310 and MXA910 blocks located under the “SHURE Mic” option. This can be found in the “Network I/O Blocks” segment under I/O Blocks within the Object Bar. Once selected, you’ll be prompted to choose the desired Microphone Model and Channel Count. The channel or lobe count will need to match the number of lobes expected from the source microphone array. It has been observed that using four individual lobe outputs with Biamp per channel AEC processing performs better than the mixed output option. However, each room and system is unique, so please select the appropriate initialization state.
Now that the appropriate input block is created, add the corresponding Control IP Address of the respective MXA mic array in the SHURE Mic Configuration menu. Though not required, this will allow quick access to the Management Web GUI for this specific set of inputs. If the MXA mic array IP address has not already been documented, the Shure Web Device Discovery tool can be used to discover and adjust this information and as needed.
Once the Biamp configuration is sent to the Tesira, available Dante channels will populate within Dante Controller for proper routing.
MXA LED Control & Example Files
Below are some example files, images and downloadable resources. These example files include examples of how to control Mute state and LED’s of the MXA310 & MXA910 from Tesira.
Dual MXA310 System:
File download: Dual_MXA310_Example_file_2017-2-3.tmf
File download: Dual_MXA310_Example_file_2017-2-3_Alt_Mute_Logic.tmf
Single MXA910 System:
File download: Single_MXA910_Example_file_2017-8-4.tmf
File download: MXA910_-_Starting_Points_Catalog_v03.tlf
The Processing Library is a little known tool within Tesira software that allows users to create catalogs of their favorite blocks. These catalogs can be exported and shared with other Tesira users. The following image shows the icon used to import the library that was just downloaded.
Now, when the Processing Library is opened you will see all of the items that comprise the selected catalog. This catalog contains all the blocks that were used to build the example files above. These items can be added to the current system file simply by dragging and dropping them into the file.
Tips & Tricks:
- It is a good idea to plan out the IP scheme for each system ahead of time.
- Each Shure MXA device requires two IP addresses, one for control and one for Dante.
- The TesiraFORTÉ DAN will also require two IP addresses, one for control and one for Dante.
- If these addresses are statically set, they will remain the same.
- If these addresses are set to DHCP and drop to link-local (169.254.x.x), the microphones may hop to different IP addresses with each reboot. This would break control and auto-launch functions that were configured in Tesira.
- If there is a DHCP server, it may be best to reserve the necessary IP addresses for the respective devices.
- It is also helpful to strategically name and document each Dante endpoint as this will make routing flows in Dante Controller much more intuitive.